Features:

• High Impact Plastic Body
• High Pressure Glue Injector
• Removable Plunger
• Manufactured by Maxmetrix LLC
• Made in USA

Filling Instructions:

Moisten O-Ring before inserting the plunger and screwing the brass tip into the barrel. Pull the plunger back beyond the glue filling port, using a white or yellow water-based glue press nozzle against glue port and fill injector barrel. Wet barrel before use. Injector may be immersed in water to prevent glue from hardening.

Cleaning & Storage:

• Clean with warm water and brush. Brass nozzle may be removed for thorough cleaning.
• Regularly lubricate, using cooking oil on O-Ring to maintain a smooth and airtight seal.
• Do not allow glue to dry in the injector.
• Do not use solvent to clean.

Applications:

Reglue Joints (Furniture, Doors, Stair Rails, Cabinetry and more)

1. Drill a 1/32" hole that opens into a cavity where the joint needs reglueing (1/16" nozzle for higher volume dispensing is available from your retailer).
2. Place the brass tip into the drilled hole, inject until excess glue begins to appear around joints.
3. Remove excess glue with damp towel and apply clamps. When dry remove the clamps and fill the drilled hole if necessary. Touch up with color.

Repair Veneer:

1. Drill a 1/32" hole into the veneer where gluing is needed.
2. Inject a small amount of glue into the drilled hole. Roll the area with a roller to spread the glue evenly. TIP: A wooder wallpaper roller works well.
3. Remove excess glue and apply a clamp

Repair Squeaky Flooring:

1. At squeak location, drill a 1/32" hole deep enough to open into the cavity between the backing and flooring.
2. Place the brass tip into the drilled hole and dispense glue.
3. Wipe excess glue, with damp towel. When dry, fill the drilled hole and touch up with color.

Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.

We care about our customers' safety. Many of the products listed on our website require a California Prop 65 warning. Some products contain chemicals such as lead and nickel compounds and acrylic dust. Additionally, some products are used on wood which creates wood dust. Both Wood dust and these other chemicals are substances known to the State of California to cause cancer. California's Proposition 65 entitles California consumers to special warnings for products that contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm if those products expose consumers to such chemicals above certain threshold levels. Because our web site lists multiple items per page, we are providing ample warning by providing the ability to obtain clear and reasonable Prop 65 warnings prior to completion of your purchase decision. We are also updating our products packaging to be clearly labeled with the correct warnings if needed per Prop65 guidelines. For more information www.p65warnings.ca.gov or call 916-445-6900.